Home | |

Jaguar IRS Vented Rotor Kits with PKG/EBs

We have kits available, depending on which Series of IRS you have.

(CLICK to see Jag IRS Generations for pics and descriptions).


PLEASE NOTE....

All of our kits include rebuilt Girling finned aluminum calipers, caliper brackets, rotor adaptors, new drilled and slotted solid 1/2" OR cross- drilled slotted vented .810 rotors, E-Brake Junction Bracket, Proportioning Valve, 2 Residual Pressure Valves, with all mounting hardware.

The vented rotors are cross-drilled and slotted 10.75" x .810" Wilwood rotors. A small amount of relief grinding on the inside of the Lower Control Arms is needed for rotor clearance. This does not effect the strength of the LCAs.

Up-grade your brakes and get better braking over the OEMs as well as adding some visual pizzazz.

Our vented rotor brake kit using '88/'96 Vette rear calipers

This kit is similar to the one that was featured in the June 1987 issue
of StreetRodder Magazine's article on the give away Yellow T-Bucket Roadster built by California Custom Roadsters but with mechanical hand brakes.





Adaptor installed, pic 1

Adaptor installed, pic 2



The vented rotor brake kit using '88/96 Vette rear calipers with integrated Ebrakes installed


Just developed - This kit with vented rotors uses Girling '88/96 Corvette C4 rear calipers with internal mechanical E/Brakes equipped with Wilwood's 10.75" x .810" cross-drilled and slotted rotors. A small amount of relief grinding on the inside of the Lower Control Arms is needed for rotor clearance. This kit, due to the large size of the Corvette calipers, requires dimpling the rear cover for LH caliper clearance and can only be used with the stock diff cover. Available for the Series I, early and late Series II - Salisbury units.

Click to see more photos.



JHE unconditionally warrants their products to be free of manufacturing defects when used as directed. The manufacturer, however makes no warranty expressed or implied, beyond product replacement, because the manufacturer cannot control the users handling, use, or proper installation.